Cateye CC-AT100 Manual de Instruções

CC-AT100WITH ALTIMETER FUNCTION500 Meter49048047046045044043042041040015000 Feet1470014400141001380013500132001290012600123001200050403020100-10-20-30

E10may cause even a greater change. In seemingly stable weather conditions, youmay expect to see the Altitude fluctuate as much as 100 feet from morni

E11How to Correct the AltitudeFirst display the main mode showing , with the operation of the Mode button. Press the Setbutton when the speed is zero

E12• Secure the wire with the wire securing tape as in Fig. 20. Windthe wire round the outer cable up to the handlebar. When ad-justing the length, be

E133. Power Saving FunctionWhen the main unit is left without receiving any signal for about 5 minutes continuously, powersupply is shut down and the

E14A Average Speed (Main Mode)Displays the average speed from the start to the current point on the sub display. With Reset opera-tion, it returns to

E15M Maximum Speed (Sub Mode)Displays the maximum instantaneous speed on the sub display. With the Reset operation, it returnsto zero. 0.0 (2.6) - 105

E16Incorrect data appears.The static electricity may cause an incorrect display.Press the AC button and reset the speed scale and the clock time again

E17DAILY CAREIf the altitude sensor cover is clogged with mud etc., the unit doesn't measure altitude. After the rideon muddy roads or in the rai

E18SPECIFICATIONSDisplay RangesCurrent Speed S 0.0(2.6) - 105.9 km/h (27 inch) ±0.5 km/h (under 50 km/h)[0.0(1.6) - 62.9 mile/h ±0.5 mile/h (under 31

E19SETTING VALUES CROSS REFERENCE TABLE*The tire size is marked on both sides of the tire.LIMITED WARRANTY2-Year Warranty: Only Main Unit (excluding b

E2INSTRUCTION MANUALIntroductionThank you for purchasing CATEYE CYCLOCOMPUTER Model CC-AT100. As well as cyclocomputerfunction, this model has altimet

U.S. Pat. Nos. 4633216/4642606/5236759/5226340, Pat. Pending and Design Patented.2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 JapanPhone: 81-6

E3INDEXNames -------------------------------------------------------------------------------------------- 4For Safe Operations (Important)------------

E4NAMESMain UnitA Display1 Main Display2 Sub Display3 Bicycle Symbol4 Altitude Symbol5 Mode Symbol6 Speed Scale Symbol7 Temperature Scale Symbol8 Auto

E5FOR SAFE OPERATIONS (IMPORTANT)For safe and appropriate use, always observe the following.Caution:• Don't pay too much attention to your cycloc

E6Battery CoverCloseOpenCR2032Fig.1SET UP1. How to Put in a Battery1.Remove the battery cover on the back with a coin or a similar opener (Fig. 1).2.I

E7-3. Setting Temperature ScaleWhen the process of setting speed scale is completed, "°C" symbol illuminates (Fig. 4). With each press ofthe

E8• Each main mode has its respective sub mode. To switch to the sub mode, hold down this button. Toswitch back to the main mode from the sub mode, ju

E9 ResetWhen the S/S button and the Mode button are pressed simultaneously, the following data can be reset, depending on the mode.For resetting tri